Product Description
This is a superbly made 1” optical component mount. True orthogonal adjustment in both elevation and azimuth is possible with zero cross-talk between the adjustments. These mounts are standardly supplied with the mounting foot and hex adjustment screws (5/64 inch wrench). In addition, these mounts include a special plate with foam pad so the holders may be installed within a dust-resistant enclosure while retaining access to the azimuth and elevation adjustments. Seals add approximately 0.10 inches to height of holder.
Additionally, these mounts have the optional ‘soft knobs’ installed on the top of the actuator screws. In addition to the soft collar for easy adjustments, there are capstan holes located around the top of the knob.
Travel, each axis -- plus or minus 4 degrees
Minimum controllable motion -- 3.8 arc seconds
100 TPI adjustment srews (hex head)
Maximum height --4.07 inches
Height of holder -- 3.1 inches (less acutators)
Width -- 2 inches
Depth of foot -- 1.48 inches
Optic axis height -- 1.5 inches (including foot)
1" optic bore with two nylon-tipped set screws
Siskiyou model number -- IVM100
Component mounts are in near-new condition – generally the only evidence of previous use are the light impressions made within the counterbores of the mounting foot. The mounts are in perfect functional condition.
Location MB 115, 116
Photo set 837