Product Description
This is a Design Components linear motorized stage consisting of two linears arranged in an XY configuration. Each linear motion slide is 15 x 10 inches (base and top plate same). There is a mounting plate for NEMA 23 motors that is proud of the base long dimension by 0.720”. The flex coupling is present on both stages, but both motors are absent. Each stage has a 6-inch range of motion and runs on cross-roller bearings.
Each linear has an end-stop detector system fixed to one side with adjustable limit plates. All four plates are present, and the cable for both axes terminates in a single connector (see third photo). Each linear stage is 3” tall, so the pair is 6 inches tall. The upper slide is pin-registered to the lower slide, and may be removed if desired. Model number of the stage is DC-1010R Serial number is M1-11. The complete stage weighs close to 77 pounds without motors.
The stage appears to be in excellent condition. Both linears were run to the limits of their excursions without any problems. The lead screws appears to be a ball-screw type and very little force was required to actuate the stage
I was unable to find out any of the specifications on this stage, but it certainly appears that it is meant to support hundreds of pounds.
Location H1R1
Photo set 672